Table of Contents
Advertisement
Printing a Label Using the P-touch Labeling System Keyboard
Changing and Deleting the Time Stamp Settings
To change the [Time Stamp] settings, select the clock icon, and then press the OK or Enter key.
To delete a time stamp from a label, position the cursor to the right of the clock icon or select the clock icon,
and then press the BS (Backspace) key.
Setting Character Attributes
Setting Character Attributes by Label
Using the Format key, you can select a font and apply size, width, style, line, and alignment attributes.
Selectable "Character Attribute" options are listed in the Appendix. (See Character Attribute on page 230.)
a
Press the Format key.
The [Font] dialog box appears.
b
Select an attribute using the
c
Select the setting for that attribute using the
the settings.
Note
New settings are NOT applied unless you press the OK or Enter key.
Note
• To return to the previous step, press the Esc key.
• To set the selected attribute as the default setting, press the Space key.
• Small characters may be difficult to read when certain styles are applied (for example, Shadow + Italic).
• Depending on the label type, you cannot change the Format setting. In this case,
side of the dialog box.
Setting Character Attributes by Each Line
When a label consists of two or more lines of text, you can set different character attributes (font, size, width,
style, line and alignment) for each line.
or
key.
or
key, and then press the OK or Enter key to apply
2
2
2
2
appears on the left
2
32
Advertisement
Table of Contents
