Label Printing; Label Preview; Printing A Label; Printing A Single Page - Brother P-touch E300 User Manual

LABEL PRINTING

You can preview the current page and check the layout before printing.
Press the 預覽 key.
An image of the label is displayed on the screen.
The length of the label is shown in the lower-right corner of the screen.
Press the or key to scroll the preview to the left or right.
Press the or key to change the preview magnification.
• Press the 取消 , 執行 or 段落更換 key to return to the text entry screen.
• To scroll the preview to the left or right end, press the Shift key and then press the
• To print the label directly from the preview screen, press the 列印 key or open the print options
screen and select a print option. Refer to "Printing a Label" below for details.
• The print preview is a generated image of the label, and may differ from the actual label when printed.
Labels can be printed once text entry and formatting is complete.
• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to
be discharged with the tape, making the tape no longer usable.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.
• Be sure to check that there is enough tape remaining when printing several labels
continuously. If tape is running low, set fewer copies, print labels one at a time,
or replace the tape cassette.
• Striped tape indicates the end of the tape cassette. If this appears during printing,
press the Power key to turn the P-touch off. Attempting to print with an empty
tape cassette may damage the labelling system.

Printing a single page

Press 列印 key to start printing.

Printing a range of page

When there are multiple pages, you can specify the range of pages to print.
1
Press the 列印 key. The screen where you specify the range is displayed.
2
Select "全部", "當前畫面" or "範圍" by using
面 ", go to step 4. If you select " 範圍 ", press the 執行 or 段落更換 key.
3
Specify the first page and the last page.
Blank pages are not printed.
4
Press the 執行 or 段落更換 key to print.

Label Preview

Printing a Label

or key. If you select "全部" or "當前畫
or key.
1
2
3
4
5
6
7
8
9
41
Label Preview