Beds - Chausson V594S User Manual

CHAP. XI operation of appliances

BEDS

n
Above the driver
n
Fold the pivoting board down to the horizontal position, if
there is one in your chosen model.
Remember to lift it up again to increase your driving space
before you start driving.
In the dinette area
n
• Put the table between two seats or in front of the seat,
depending on the model.
• Put the sliding extensions into position (if there are any) at
each end of the bench.
• Lastly, put the different cushions in place: seat and back
cushions and other bedding parts.
• On certain models other bedding parts are furnished in
option (check with our dealers).
Bunks
n
When the upper bunks or beds are used by children, in
particular children under six, pay attention to the risk of falls
and take all necessary precautions to ensure their complete
safety.
Certain models are equipped with safety nets that should be
put in place under your responsibility.
?
A label indicates
this normative obligation.
Rear bed
n
The bed can be raised using
a crank; there are two possibilities. a crank; there are two possibilities.
1) The driver and crank are located under
the bed, with access from the garage
?
door.
2) The driver and crank are located
under the bed, with access from
the outer side of the bed.
Raise the box spring/mattress for
easier maneuvering.
LCD
INFO
LCD
59