Table of Contents
Advertisement
4044-XXX
User Error Message Table
Primary User Error Message Table
When a user error message occurs the printer stops printing and
one or two operator panel LEDs are on solid or blinking until the
printer is powered off. Locate the printer's LED Status in the
following table and take the indicated action.
User Error Message
Paper Jam
Load Manual Paper/
Envelope
Load Paper/Load
Envelope
Top Cover Open
2-6
Service Manual
LED Status
Paper Jam on solid
Load Paper blinks and
Press Button on solid
Load Paper on solid
and Press Button on
solid
Error on solid
Action
Open cover and clear
any paper jams. Close
the top cover. If the
error message is still
present, go to
the"Paper Feed
Service Check" on
page
2-24.
Load media into the
manual slot and push
the operator panel
button to resume
printing one sheet or
do an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Load media in the
appropriate paper tray
and push the operator
panel button to
resume printing or do
an operator panel
reset by pressing and
holding the operator
panel button for more
than three seconds.
Close the top cover. If
the error LED remains
on solid and POST
does not continue, go
to the
"Cover Open
Switch Service
Check" on page
2-13.
Advertisement
Table of Contents
