Table of Contents
Advertisement
4044-XXX
Poor fusing of image
FRU
Fuser Lamp
Paper
Light print
FRU
Toner Cartridge
Transfer Roller
HVPS Contact (Transfer Roller)
HVPS Board
Action
The fuser may not be operating at
the proper temperature to fuse the
toner to the paper. Go to the
Fuser Service Check" on page
Make sure recommended paper is
being used.
Action
Make sure the toner cartridge is
installed correctly and is not low on
toner. If the problem continues,
install a new toner cartridge.
Check the transfer roller for signs of
toner buildup and contamination.
Inspect the HVPS contact (transfer
roller) for contamination. Inspect the
HVPS board for contamination
where it meets the HVPS contacts. If
all components appear free of
contamination, replace the following
FRUs one at a time in the order
shown:
Transfer Roller
HVPS Contact (Transfer Roller)
HVPS Board
Diagnostic Information
"Cold
2-17.
2-33
Advertisement
Table of Contents
