Print Quality Test - Lexmark Optra 4044-XXX Service Manual

4044-XXX

Print Quality Test

There are three print quality test pages. The first page displays the
installed printer base code level and user default settings for the
following:
Top Margin Offset
Left Margin Offset
Printer Page Count
Installed Memory
PQET Setting (on/off)
Toner Saver (on/off)
Print Resolution
Print Darkness
The next two test pages are used to evaluate print quality. One test
page is gray and the other is black. Perform the following steps to
print the second test page:
1. Turn the printer off.
2. Open the top cover.
3. Turn the printer power on.
4. When the Error LED comes on solid, double-click the operator
panel button.
5. Once the Error and Press Button LEDs start blinking, close the
top cover.
6. The Ready LED comes on solid and the Error and Press Button
LED continue blinking.
7. Double-click the operator button four times. The Ready and
Data LEDs come on solid while the Error and Press Button
LEDs continue blinking.
8. Perform a long button press until all LEDs come on solid.
9. The test pages are printing.
10. When the test pages have finished printing, the Ready LED
comes on solid and the Data LED goes off.
Note: After the print quality test pages print, the printer automati-
cally returns to the Ready mode.
3-2
Service Manual