Concept Pro AIR20NPC series User Manual

Weatherproof mono ir camera

Advertisement

AIR20/60NPC Range
Weatherproof Mono IR Camera
USER MANUAL
P o w e r e d
b y
TECH NO LO G Y
AD V A N C E D I NF R AR ED

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AIR20NPC series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Concept Pro AIR20NPC series

  • Page 1 AIR20/60NPC Range Weatherproof Mono IR Camera USER MANUAL P o w e r e d TECH NO LO G Y AD V A N C E D I NF R AR ED...
  • Page 2 CAUTION This installation should be made by a qualified service person and should abide to all local codes. In order to prevent electronic shock and/or destroy waterproof seals, do not loosen any screws on the camera body. Adjust the sunshield cover to avoid exposure of direct sunlight on the lens. Do not touch the front glass directly.
  • Page 3: Packing Contents

    The Concept Pro AIR20 / 60NPC range are weatherproof IR cameras, suitable for number plate capture upto speeds of 112mph & 28mph respectively Fixing Bolt for Sunvisor Mounting Bracket Photo Sensor Bracket Adjustment IR LED External Lens Adjustment Sunvisor LED Adjustment...
  • Page 4: Installation

    INSTALLATION Important: Ensure all cautionary procedures are observed during installation. It is recommended the camera is tested during the most demanding environmental conditions such as low light or bright sunlight to ensure continuity of effective CCTV monitoring. Remove the camera unit carefully from the box, reserving the accessory contents in a safe place.
  • Page 5: Bnc Connector

    CONNECTION BNC CONNECTOR POWER CONNECTOR Connect the video out port to your video cable  running to the monitoring recorder. Check the power supply is of the correct level  and connect your power supply into the power port on the Camera. View the picture on a monitoring device to ...
  • Page 6 POSITIONING Point the Camera towards the intended area to be monitored. EXTERNAL LENS ADJUSTMENT Open the lens adjuster cover and adjust focus and zoom. Loose the screw on the lens adjuster cover. 2. Lens Adjustment Tool Focus and Zoom Adjustments Zoom Wide / Narrow Focus Near / Far NUMBER PLATE CAPTURE...
  • Page 7: Led Adjustment

    LED ADJUSTMENT The LED Adjustment contains adjusters for both brightness & length of time the LED’s are on for. LED ON CURRENT VIDEO 1. “CURRENT” - This adjusts the brightness of the IR LED light 2. “LED ON” - This adjusts the time at which the LED’s will come on. ‘...
  • Page 8 DIMENSIONS 300mm(11.81”) 319mm(12.56”)
  • Page 9 100mm(3.94”) 40mm(1.57”)
  • Page 10: Specification

    SPECIFICATION AIR20NPC AIR60NPC Model 112MPH - (180kmph) 28MPH - (45kmph) Max NPC Speed 5~30M - (16.3-98.3ft) 2~15M - (6.56~49.18ft) NPC Distance IP66 IP Rating Monochrome Type NTSC/PAL Signal System 1/3" Sony High Resolution CCD Pick Up Device NTSC:811H×508V; PAL:795H×596V Picture Elements 550TVL Resolution 0Lux (20 Pieces Super High Power LED ON)
  • Page 11 OTHER CAMERAS IN THE AIR RANGE FROM CONCEPT PRO The AIR range includes a number of other housed Infra Red cameras for external use. Please note that the cameras below are not Number Plate Capture cameras. AIR15 Range 18 IR LEDs 420 TVL / 520 TVL Options 3.6mm / 6mm Fixed Lens Options...

This manual is also suitable for:

Air600npc series

Table of Contents