Download Print this page

Concept Pro AIR2024-AHD Series User Manual

Weatherproof colour/mono ir camera

Advertisement

Quick Links

AIR2024-AHD Range
Weatherproof Colour/Mono IR Camera
USER MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the AIR2024-AHD Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Concept Pro AIR2024-AHD Series

  • Page 1 AIR2024-AHD Range Weatherproof Colour/Mono IR Camera USER MANUAL...
  • Page 2 CAUTION Installation should be made by a qualified service person and should adhere to all local codes. In order to prevent electric shock and avoid damage to waterproof seals, do not loosen any screws on the camera body. Adjust the sunshield to avoid exposing the lens to direct sunlight. Do not touch the front glass.
  • Page 3 The Concept Pro AIR20 Range is a weatherproof IR camera, suitable for monitoring areas in hostile conditions and in low light. Fixing Bolt for Sunvisor Mounting Bracket Photo Sensor Tri- Axis Points IR LED 12V DC Connector Sunvisor Video Out Connector...
  • Page 4: Installation

    INSTALLATION Important: Ensure all precautions are observed during installation. It is recommended the camera is tested during the most demanding environmental conditions such as low light or bright sunlight to ensure continuity of effective CCTV monitoring. You may find the use of an ND filter helpful. Remove the camera unit carefully from the box,and keep the accessories in a safe place.
  • Page 5 POSITIONING Point the Camera towards the area to be monitored.
  • Page 6: On-Screen Display (Osd)

    ON SCREEN DISPLAY (OSD) OSD Controller Shift the button UP for 5 seconds. This will switch to a 960H ready output. Shift the button to the LEFT for 5 seconds. This will switch to the 1080p AHD output. RIGHT LEFT DOWN MENU / ENTER Please note: The 4-in-1 variant AHD cameras will come with a yellow...
  • Page 7 MAIN MENU ⏎ ⏎ DAY-NIGHT ⏎ VIDEO SETTING ⏎ LANGUAGE: ENGLISH, CHINESE, SPANISH, KOREAN, ITALIAN RESET ⏎ SAVE-EXIT ⏎ EXIT EXPOSURE BRIGHTNESS: 1-20 EXPOSURE MODE: GLOBE, CENTER, BLC, FLC LV (EXPOSURE MODE = BLC): GAIN: RETURN ⏎ MODE: ATW, MWB RGAIN 1-16 (MODE = MWB):...
  • Page 8: Specification

    SPECIFICATION AIR2024-AHD/2.8 AIR2024-AHD/6 AIR2024-AHD/12 MODEL IMAGE SENSOR 1/2.8”Sony CMOS SIGNAL SYSTEM PAL/NTSC MIN. ILLUMINATION 0.001Lux @ (F1.2,AGC ON),0 Lux with IR S/N RATIO ≥50dB DAY & NIGHT SHUTTER SPEED PAL:1/50-1/50000, NTSC:1/60-1/60000 WIDE DYNAMIC RANGE dWDR DIGITAL NOISE REDUCTION 2D/3D 2.8mm Fixed 6mm Fixed 12mm Fixed LENS...
  • Page 9 DIMENSIONS...
  • Page 10 NOTES...
  • Page 11 NOTES...
  • Page 12 OCTOBER 17 Design and specification are subject to change without notice.

This manual is also suitable for:

Air2024-ahd/6Air2024-ahd/2.8Air2024-ahd/12