Combination Switch - Mercedes-Benz M-Class Operator's Manual

Combination switch

Turn signals
High-beam headlamps
:
Right turn signal
;
High-beam flasher
=
Left turn signal
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction
of arrow ; or ?.
High-beam headlamps
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to
position 2 or start the engine.
Turn the light switch to L or c or
X
Ã.
Press the combination switch beyond the
X
pressure point in the direction of
arrow :.
In the c or à position, the high-
beam headlamps are only switched on
when it is dark and the engine is running.
The K indicator lamp in the instrument
cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam
X
headlamps: move the combination switch
back to its normal position.
The K indicator lamp in the instrument
cluster goes out.
High-beam flasher
To switch on: turn the SmartKey in the
X
ignition lock to position 1 or 2 or start the
engine.
Pull the combination switch in the direction
X
of arrow =.
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
an air bag is deployed.
R
the vehicle is slowed down severely from a
R
speed of over 45 mph(70 km/h) and comes
to a halt.
To switch on the hazard warning lamps:
X
press button :.
All turn signals flash. If you now switch on
a turn signal using the combination switch,
only the turn signal lamp on the
corresponding side of the vehicle will flash.
To switch off the hazard warning
X
lamps: press button :.
I n f o r ma t i o n P r o v i d e d b y :
Exterior lighting
Z
111