Storing The Parking Position - Mercedes-Benz M-Class Operator's Manual

Mirrors
104
otherwise not fold in when you select the
"Fold in mirrors when locking" function in the
on-board computer (
Make sure that the SmartKey is in
X
position 1 in the ignition lock.
Briefly press button :.
X
Folding the exterior mirrors in or out
automatically
If the "Fold in mirrors when locking" function
is activated in the on-board computer
( page 237):
Y
the exterior mirrors fold in automatically as
R
soon as you lock the vehicle from the
outside.
the exterior mirrors fold out again
R
automatically as soon as you unlock the
vehicle and then open the driver's or front-
passenger door.
i
The mirrors do not fold out if they have
been folded in manually.
Exterior mirror out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
Vehicles without electrically folding
X
exterior mirrors: move the exterior mirror
into the correct position manually.
Vehicles with electrically folding
X
exterior mirrors: press and hold the
mirror-folding button (
hear the mirror engage in position.
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
( page 103).
Y
Automatic anti-glare mirrors
G WARNING
If incident light from headlamps is prevented
from striking the sensor in the rear-view
mirror, for instance, by luggage piled too high
page 237).
Y
page 103) until you
Y
in the vehicle, the mirror's automatic anti-
glare function will not operate.
Incident light could then blind you. This may
distract you from the traffic conditions and,
as a result, you may cause an accident.
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if the ignition is switched on and
incident light from headlamps strikes the
sensor in the rear-view mirror.
The mirrors do not go into anti-glare mode if
reverse gear is engaged or the interior lighting
is switched on.
Parking position for the exterior
mirror on the front-passenger side
Setting and storing the parking position
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this
position.
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the
ignition lock.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
I n f o r ma t i o n P r o v i d e d b y :