Button Functions - Sigma RC Move Manual

1.2 Button functions

The Rc MoVE has five buttons:
TogglE/-, TogglE/+, sToP, sTART, and EnTER
STOP button:
This button takes you back a level
within the menu structure.
in training mode, stop the training
session by pressing this button.
Resetting training data without
saving:
Press and hold the sToP button.
TOGGLE/- and
TOGGLE/+ buttons:
TogglE/+ enables you to navigate to the
right in the main menu; TogglE/- takes
you back again. if you are at a point at which
values can be configured, use TogglE/+
to set a higher value and TogglE/- to set
a lower value.
Activating/deactivating the light mode
Press the TogglE/- and TogglE/+
buttons simultaneously. Pressing the
buttons simultaneously a second time
switches the display backlight off again.
The light stays on for approx. three seconds.
4