Lexmark 7600 Series Fax Manual page 9

Use the
Memory card slots
10
11 Card reader light
12 PictBridge port
13 Wi-Fi indicator
Note: Your printer model may not have wireless
capability and may not have this indicator.
4
Use the
Top cover
1
2 Scanner glass
1
2
3
W
PRI I
NTIN F I
G
Understanding the parts of the printer
To
Insert a memory card.
Check card reader status. The light blinks to indicate that
a memory card is being accessed.
Connect a PictBridge-enabled digital camera or a flash
drive to the printer.
Check wireless status:
•
Off indicates that the printer is turned off, is powering
up, or is in Power Saver mode. In Power Saver mode,
the power light pulses on and off.
•
Orange
– indicates that the printer has not yet been
configured for a wireless network.
– indicates that the printer is configured for an ad hoc
connection, but is not communicating with another
ad hoc device.
•
Orange blinking indicates that the printer is
configured but is unable to communicate with the
wireless network.
•
Green indicates that the printer is connected to a
wireless network.
6
5
W
I
PRIN F
TING I
11
To
Access the scanner glass.
Scan and copy photos and documents.
9
7
8
9
10