Fax Setup; Getting The Printer Ready To Fax; Setting Up The Printer As A Copier Only Or Fax Only - Lexmark 7600 Series Fax Manual

Fax Setup

Getting the printer ready to fax

CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product
or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning
storm.

Setting up the printer as a copier only or fax only

Use the following instructions if you do not want to connect the printer to a computer.
Note: If you want to connect the printer to a computer, use the setup documentation and the printer software CD
that came with the printer.
1
Unpack the printer.
Notes:
•
Place the printer near the computer during setup. If you're setting up on a wireless network, you may move
the printer after setup is complete.
•
Contents, such as the number of print cartridges, may vary by model and region.
•
Do not attach the USB cable until prompted to do so.
1 Power cord
2 Telephone cord
Printer software CD
3
USB cable or installation cable
4
Note: Your printer model may not ship with a USB cable. Purchase a USB cable separately.
9
8
7
6
W
I
PR F
INT ING I
4
5
Fax Setup
11
1
2
3