Lexmark 5300 Series User Manual page 130

M
AKE SURE THE PRINTER IS RECEIVING POWER
If the light is not on, the printer may not be receiving power.
•
If necessary, press
•
Plug the printer into a different electrical outlet.
•
If the printer is plugged into a surge protector, unplug the printer, and plug it directly into an electrical outlet.
•
Press again to turn the printer back on.
M
AKE SURE THE STICKER AND TAPE ARE REMOVED FROM THE PRINT CARTRIDGES
1
Lift the scanner unit.
2
Remove the print cartridges from the print cartridge carrier.
3
Make sure the sticker and tape are removed from the bottom and back of the print cartridges.
M
AKE SURE THE CARTRIDGES ARE PROPERLY INSTALLED
With the front of the printer facing you, check for proper print cartridge installation. If you are using a color cartridge,
make sure it is properly installed in the right carrier. If you are using a black cartridge or photo cartridge, make sure
it is properly installed in the left carrier.
For more information, see the related topic below.
M L
AKE SURE THE EXMARK PRINTER DRIVER IS SET AS THE DEFAULT PRINTER AND IS NOT ON
HOLD OR PAUSED
To set the printer as default
1
From the Finder desktop, choose Applications
2
From the printer list dialog, select your printer.
3
Click the Make Default icon.
To resume print jobs
1
From the Finder desktop, choose Applications
2
From the list of printers, double-click your printer.
3
From the Printer pop-up menu, click Start Jobs if you want to resume all print jobs in the queue; if you want
to resume a particular print job, select the document name, and then click Resume.
C USB
HECK YOUR CONNECTION
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
to turn off the printer.
USB symbol.
Troubleshooting
Utilities Print Center or Printer Setup Utility.
Utilities Print Center or Printer Setup Utility.
130