Wireless Network Printer Does Not Print - Lexmark 4800 Series User Manual

Wireless network printer does not print

These are possible solutions. Try one or more of the following:
Check power
Make sure the light is on.
Check cable
•
Make sure the power cable is connected to the printer and to the electrical outlet.
•
Make sure the USB cable or the installation cable is not connected.
Check Wi-Fi indicator light
Make sure the Wi-Fi indicator light is green. If it is not green, see "Wi-Fi indicator light is orange" or "Wi-Fi indicator
light is blinking orange during installation" in "Wireless troubleshooting."
Check if printer driver is installed
Make sure the printer driver is installed on the computer from which you are sending the print job.
1
Do one of the following:
•
In Windows Vista, click:
•
In Windows XP, click:Start
•
In Windows 2000 and earlier, click: Start
If you cannot find the icon for your printer, then the printer driver is not installed.
2
If the printer driver is not installed, insert the installation software CD into your computer.
3
Follow the instructions on the computer screen.
Note: You must install the printer driver on each computer that uses the network printer.
Check if printer is connected to the wireless network
1
Print a network setup page. For more information, see "Printing a network setup page."
2
Check to see if "Status: Connected" appears under Network Card.
Reboot the computer
Turn off and restart the computer.
Check printer ports
Make sure the correct printer port is selected.
1
Click:
•
In Windows Vista:
•
In Windows XP: Start
•
In Windows 2000 and earlier: Start
2
Right-click the Lexmark 4800 Series icon.
3
Click Properties Ports.
Control Panel
Settings Printers and Faxes.
Settings
Control Panel Printers.
Settings Printers and Faxes.
Settings
107
Printers.
Printers.
Printers.