Making A Color Or Black-And-White Scan; Scanning Multiple Photos At One Time Using The Computer - Lexmark 4800 Series User Manual

Making a color or black-and-white scan

1
Make sure the printer is connected to a computer, and both the printer and the computer are on.
2
Load an original document facedown on the scanner glass.
3
From the control panel, press
4
Press .
5
If your printer is connected to more than one computer:
a
Press or repeatedly until the computer to which you want to scan is highlighted.
b
Press .
If you set a PIN during network setup and are being asked for it:
1
Enter the PIN using the
digit.
2
Press .
6
Wait until the printer has finished downloading the scan applications list.
7
Press repeatedly until Color is highlighted.
8
Press or to choose Color or Black & White.
9
Press to preview the copy.
10
Press to continue adjusting the settings.
11
Repeat step 9 to step 10 as needed.
12
Press .
13
Follow the instructions on your computer screen.

Scanning multiple photos at one time using the computer

1
Place the photos facedown on the scanner glass.
Note: For best results, place photos with the most space possible between the photos and the edges of the
scan area.
or until Scan is highlighted.
and to select a digit location and the
W
I
PR F
IN TI I
NG
86
and to select a value for that