Preparing The Worktop - Miele CS 1223-1 Operating And Installation Instructions

Preparing the worktop

^ Make the worktop cut-out for one or
more appliances in accordance with
the building-in diagrams.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the right or left of the
appliance.
See "Safety instructions for
installation".
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
The materials used must be
heat-resistant.
Make sure that the sealant does not
come into contact with the top of the
worktop.
If, during installation, you find that the
seals on the corners of the frame are
not flush with the worktop surface,
the corner radius (ß R4) can be
carefully scribed to fit.
36