Miele CS 1223-1 Operating And Installation Instructions page 10

Induction wok
Hide thumbs Also See for CS 1223-1:
Table of Contents

Advertisement

Warning and Safety instructions
~
Never open the casing of the appliance.
Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults.
~
While the appliance is under guarantee, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.
~
The manufacturer can only guarantee the safety of the appliance
when original Miele replacement parts are used. Faulty components
must only be replaced by genuine Miele original spare parts.
~
The wok is not intended for use with an external timer switch or a
remote control system.
~
If the plug is removed from the connection cable or if the
appliance is supplied without a plug, the appliance must connected
to the electrical supply by a suitably qualified electrician. If the
connection cable is faulty, it must be replaced with a special
connection cable. See "Electrical connection".
~
The appliance must be disconnected from the mains electricity
supply during installation, maintenance and repair work. Ensure that
power is not supplied to the appliance until after it has been
installed or until any maintenance or repair work has been carried
out.
~
Danger of electric shock.
Do not use the wok if it is faulty, or if the ceramic surface is cracked,
chipped or damaged in any way. Switch it off immediately, and
disconnect it from the mains electricity supply.
10

Advertisement

Table of Contents
loading

Table of Contents