Using The Control Panel Menus; Using The View And Select Menu - Lexmark 350 Series User Manual

Press To
4 •
Navigate through menu selections of the main menu.
•
Navigate through selections of a submenu.
•
When viewing photos, navigate from one photo to another.
5 •
In a menu, enter submenus and perform actions.
•
Select a photo being viewed on the display. Press
•
Eject paper. (Press
6
•
Navigate through submenus of a menu.
•
When previewing a photo, decrease the number of copies to be printed.
7 •
Navigate through menu selections of the main menu.
•
Navigate through selections of a submenu.
•
When viewing photos, navigate from one photo to another.
8 •
In a submenu, save the current selection, and return to the previous display.
•
When viewing a photo slideshow, pause or stop the slideshow.
•
When printing a photo or an alignment page, stop and cancel the job, and eject the paper.
9 •
In the photo selection screen, bring up the Photo Edit Mode menu.
•
In the Print Preview screen, bring up the Print Settings menu.
10 •
Navigate through submenus of a menu.
•
When previewing a photo, increase the number of copies to be printed.

Using the control panel menus

Using the View and Select menu

1
Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 20 or "Inserting
a flash drive" on page 21.
2
Press or repeatedly until View and Select appears on the display.
3
Press .
4
Follow the instructions on the display.
From here You can
View and Select •
Select one or more photos for viewing and/or printing
•
Select the number of copies to print.
Press
Print Preview See a preview of the photo/s to be printed.
You can also press
quality, paper type, and passport photo print settings.
for three seconds.)
to go to the Print Preview screen.
to adjust the print settings, including paper size, photo size, layout, print
Learning about the printer
again to deselect the photo.
13