Administrative Support; Adjusting The Brightness Or Contrast Of The Display; Disabling Control Panel Menus; Enabling Control Panel Menus - Lexmark C530 User Manual

Administrative support

Adjusting the brightness or contrast of the display

Note: These options are available on some models.
To adjust the brightness or contrast settings:
1
Make sure the printer is on and Ready appears.
2
From the control panel, press
3
Press until Settings appears, and then press
4
Press until Utilities Menu appears, and then press
5
Press until Brightness appears, and then press
Press until Contrast appears, and then press
6
Press to increase the setting or
7
When the adjustment is complete, press
Ready appears on the display.

Disabling control panel menus

Since many people could be using the printer, a support person may choose to lock the control panel menus to keep
menu settings from being changed.
1
Make sure the printer is turned off.
2
From the control panel, press and hold
3
Release both buttons when Performing Self Test appears.
The printer performs its power-on sequence, and then CONFIG MENU appears.
4
Press until Panel Menus appears, and then press
5
Press until Disable appears, and then press
Submitting Selection and Disabling Menus appear briefly.
6
Press until Exit Config Menu appears, and then press
When Activating Menu Changes appears, the menus are disabled. Resetting the Printer appears
briefly, followed by a clock, and then Ready appears.

Enabling control panel menus

1
Make sure the printer is turned off.
2
From the control panel, press and hold
.
.
.
to decrease the setting.
. This saves the setting as the new default.
and while turning the printer on.
.
and while turning the printer on.
Administrative support
75
.
.
.
.