Printing Photos By Range - Lexmark 350 Series User Manual

3
Press or repeatedly until Print Photos appears on the display.
4
Press .
5
Press or repeatedly until Print Photos by Date is selected.
6
Press .
7
Press or to select an earlier or later start date.
8
Press or to select an earlier or later end date.
9
Press to save the date range you selected.
10
Press or to select a photo size and paper size, and the number of copies to print per photo.
11
Press .
12
If you want to adjust the print settings:
a
Press .
b
Make your selections.
c
Press to save your selections, and then go back to the Print Preview screen.
13
Press to print.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects.
For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at
least 24 hours before stacking, displaying, or storing.

Printing photos by range

Use these instructions to select the first and last photos in a range to be printed.
1
Load photo paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.) For more information, see "Loading paper" on page 19.
2
Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 20 or "Inserting
a flash drive" on page 21.
3
Press or repeatedly until Print Photos appears on the display.
4
Press .
5
Press or repeatedly until Print Photo Range is selected.
6
Press .
7
Press to continue.
8
Press or to navigate to the first photo in the range to be printed.
9
Press .
10
Press or to navigate to the last photo in the range to be printed.
11
Press .
12
Press or to select a photo size and paper size, and the number of copies to print per photo.
13
Press .
Printing photos
27