Troubleshooting; Setup Troubleshooting; Incorrect Language Appears On The Display; Power Button Is Not Lit - Lexmark 350 Series User Manual

Troubleshooting

•
"Setup troubleshooting" on page 44
•
"Print troubleshooting" on page 46
•
"Jams and misfeeds troubleshooting" on page 48
•
"Device troubleshooting" on page 49
•
"Error messages troubleshooting" on page 50
•
"Removing and reinstalling the software" on page 52

Setup troubleshooting

Incorrect language appears on the display

1
Press to turn the printer off.
2
Press to turn the printer back on.
3
Press .
4
Press .
5
Press to continue.
6
Press or repeatedly until the language you want appears on the display.
7
Press to save your selection.

Power button is not lit

Make sure you have disconnected the power supply cord from the printer and then from the wall outlet.
1
Plug the cord all the way into the power supply port on the printer.
2
Plug the cord into an electrical outlet that other electrical devices have been using.
3
If the light is not on, press

Software does not install

The following operating systems are supported:
•
Windows 2000
•
Windows XP
.
Troubleshooting
44