Using The Slideshow Menu; Using The Tools Menu - Lexmark 350 Series User Manual

Using the Slideshow menu

The Slideshow menu lets you view the images stored on a memory card or flash drive.
1
Insert a memory card or flash drive. For more information, see "Inserting a memory card" on page 20 or "Inserting
a flash drive" on page 21.
2
Press or repeatedly until Slideshow appears on the display.
3
Press .
4
Press to continue.
Each photo is displayed for a few seconds.
5
If you want to move to the previous or next photo manually, press
6
Use any of the following buttons:
•
Press to select a photo or photos to print after the slideshow.
•
Press to pause the slideshow. Press
•
Press to rotate the photo on the display.
When the slideshow is stopped, the photo or photos you selected for printing during the slideshow are displayed
by pressing .

Using the Tools menu

1
Press or repeatedly until Tools appears on the display.
2
Press .
From here You can
Device Defaults Select:
•
Language to change the language setting.
•
Country to set the default blank paper size and date format being used in your location.
•
Power Save to set the length of time before the printer, if left unused, enters a low power
state. During Power Save, the display and backlight will be turned off. Press any button to
restore power to the printer.
Print Settings Select a paper size, photo size, layout, print quality, and paper type.
Maintenance Select:
•
View Ink Level to view a graphic representing the ink level in the print cartridge. For more
information, see "Viewing the ink level" on page 42.
•
Clean Cartridge to clean the print cartridge nozzles. For more information, see "Cleaning the
print cartridge nozzles" on page 41.
•
Align Cartridge to align the cartridge. For more information, see "Aligning the print cartridge"
on page 40.
•
Print Test Page to print a test page. For more information, see "Printing a test page" on
page 42.
•
Reset Defaults to reset default settings to factory settings.
again to stop the slideshow.
Learning about the printer
15
or .