Restore User Defaults - Nokia NSM–3 Service Manual

NSM–3/3D
Service Software Instructions
Restore User Defaults... command
Activation
Alt, D,R
This command is used to restore Default User Settings, if they have de-
generated. Dialog may be opened from menu, or is opened automatically,
when loading or saving user settings fails or is skipped during flashing
(see Flash Phone... command). The dialog is also opened after full facto-
ry set.
Default settings are loaded from files in product specific subdirectory of
WinTesla directory e.g. for NSM–X this directory could be c:\wintes-
la\nsm–X . Into these directories the user should unpack all flash pack-
ages. Market areas and corresponding files are described in INI–file in
product specific subdirectory e.g. for NSM–X this file would be c:\wintes-
la\nsm–X\nsm–X.ini . INI–file is common to all flash packages, but market
areas are added to Market Area list, when new flash packages are un-
packed to product specific subdirectory.
Selecting Restore User Defaults opens the following Restore Default User
Settings dialog.
NOTE: This is a screen example. Actually enabled settings may differ.
Dialog mode: modal
Restore Default User Settings dialog box includes following items:
Default Settings static text:
Page 68
Status Bar Text
Open Restore Default User Settings.
The user can check one or more check boxes to restore corre-
sponding defaults from file to ME. Check boxes are disabled/
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 4 02/2002