Nokia NSM–3 Service Manual page 220

NSM–3/3D
Service Software Instructions
Dialog mode: modal
RX Calibration dialog includes the following items:
AFC information box:
AGC List box (ALT+A):
Repeat button (ALT+R):
Save button (ALT+S):
Cancel button (ESC):
When calibration is ended, the DAC value checking is made and if it is not
successful, error message is shown.
When exit is made, the next selections are set to the values which were
selected before this adjustment.
The exit and the use of AGC–control values is done same way as exit
from power level tuning and power coefficient use:
NOTE: After GSM calibration the same tuning must be made for the PCN
band also! To change the band go to Product Menu and select Band ,
PCN.
Page 30
Shows AFC init value, AFC slope and PSW slope values.
AGC, DAC, Voltage.
Measurement can be started again by pressing this button.
Dialog is closed and tuning is saved to phone.
Dialog is closed and tuning is not saved to phone.
Operation Mode
Update RF Information window
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 4 02/2002