Set Ui/Dev Default Values - Nokia NSM–3 Service Manual

PAMS Technical Documentation
Graphical Welcome Message check box (ALT+G):
CLI Logos check box (ALT+C):
Product Profiles check box (ALT+P):
User Settings check box (ALT+U):
Operator Logo check box (ALT+O):
Dealer Welcome Note check box (ALT+D):
Voice Mailbox check box (ALT+V):
Market Area drop list (ALT+M):
Write Phone button (ALT+W):
Close button (ESC):
Set UI/DEV Default Values... command
Activation
Alt, D,V
After selection the application asks confirmation: "Are you sure you want
to set UI/DEV to factory settings?". If Yes is answered, default settings
are resetted to the phone.
Issue 4 02/2002
enabled according to settings available in selected Market
Area.
When checked the user selects to restore default graphical
welcome message.
When checked the user selects to restore default CLI logos.
When checked the user selects to restore default product pro-
files.
When checked the user selects to restore default user settings.
When checked the user selects to restore default operator
logo.
When checked the user selects to restore default dealer wel-
come note.
When checked the user selects to restore default voice mail-
box number.
The user selects market area of the phone.
Loads settings from files and writes them to phone.
Closes the dialog box.
Status Bar Text
Reset phone to UI and SCM factory settings
E Nokia Mobile Phones Ltd.
NSM–3/3D
Service Software Instructions
Page 69