Nsm-3 And 3D Features; Menu Bar; Product; New Command - Nokia NSM–3 Service Manual

NSM–3/3D
Service Software Instructions
NSM–3 and 3D Features

Menu bar

After Sales SW's menus follow the menu structure specified in WinTesla
User Interface Specification. This specification describes the functionality
that differs from the WinTesla specification.

Product

New command

Activation
Alt, P, N
Ctrl+R
If phone is changed (with same phone type only serial number is
changed) phone will be initialized to local/normal mode (selected in TES-
LA.INI). If phone is changed to different phone type the current DLLs are
unloaded and new ones are loaded for that phone.
If the Quick/RF Info view is open, window will be automatically updated.
If Phone Information view is open, window will be automatically updated.
NOTE: When different type of phone is changed the user should select
Product/New, so that application recognises phone type change and
loads correct menu.
Open... command
Activation
Alt, P, O
Phone is set to local/normal mode. If no phone is found, connection para-
meters (from Configure/Busses) are displayed to the user and application
asks from the user does (s)he want to use that connection to flash a
phone. If the user selects Yes, current connection is used and flash only
menu is loaded. If the user selects No, application tries next connection, if
there is one.
Initialise... command
Activation
Alt, P, I
Opens a submenu which contains the following options:
Page 24
Status Bar Text
Rescan a new phone
Status Bar Text
Force load phone specific functionality
Status Bar Text
E Nokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 4 02/2002