Atp Set Pulse Dial As Default; Att Set Tone Dial As Default; At+Chup Hang Up Call; At+Crc Cellular Result Codes - Nokia PremiCell Manual

ATP Set Pulse Dial as Default

This command has no effect on the data adapter. It is included for
compatibility rea-
sons.

ATT Set Tone Dial as Default

This command has no effect on the data adapter. It is included for
compatibility rea-
sons.
ATT

AT+CHUP Hang Up Call

This command hangs up the call, also when an alternating mode call
is ac-
tive.
Syntax:
AT+CHUP Hang up call. Response is NO CARRIER.

AT+CRC Cellular Result Codes

This command controls whether or not the extended format incom-
ing call indication is used. When enabled, an incoming call is indi-
cated to the DTE with the result["resulting"?] code +CRING:<type>
instead of the normal RING.
Syntax:
AT+CRC=[<mode>]
AT+CRC?
+CRC:<n>.
AT+CRC=?
Values for <mode>:
0
tion.
1
ã2000 Nokia Mobile Phones. All Rights Reserved.
Set incoming call indication mode.
Query current setting. Response is
Show supported modes. Response is
+CRC:(list of supported <mode>s).
Disable extended format call indica-
Enable extended format call indication.
Syntax: ATP
Syntax:
13