Outgoing Call Functions - SoftBank 924P User Manual

Outgoing Call Functions

Showing/Hiding Caller ID
＞Enter number 7 S[Menu] 7 Notify caller ID 7 OFF or ON
⿟
To cancel setting: S[Menu] 7 Notify caller ID 7 Cancel prefix
⿟
Setting Caller ID on/off (Caller ID: ZP.2-21)
Adding Prefix to Phone Number
■
Save Prefix
＞Main
Menu 4 Settings 4 Call Settings
4 Highlight <Not Recorded> 4 A[Edit] 4 Enter a name
4 Enter a prefix number
⿟
Up to seven entries can be saved.
⿟
To check entries: Select a saved prefix.
⿟
To delete entries: Highlight a prefix 7 S[Menu] 7 Delete this or
Delete all (7 For Delete all , enter Phone Password) 7 YES
■
Make Calls Using Prefix
＞
Enter number 7 S[Menu] 7 Prefix numbers 7 Select an entry 7
Voice Calls: J / Video Calls: A[V. Call]
⿟
Alternatively, in detail window of Phone Book, Redial, Outgoing Call Logs
or Incoming Call Logs, S[Menu] 7 Prefix numbers 7 Select an
entry 7 Voice Calls: J / Video Calls: A[V. Call]
Example: Save "186" and "184" as prefixes, and add them to phone
numbers to show/hide your caller ID when making calls.
Sending Touch-tone Signals
Send touch-tone signals for services such as reserving
tickets, checking bank balance, etc. Save number strings to
be sent as a touch-tone signal. Use P (pause) to separate
numbers when saving.
■
＞Main
⿟
⿟
4
Prefix
■
＞Main
⿟
⿟
Save Pause Dial
Menu 4 Settings 4 Phone Settings 4 Pause Dial
4 A[Edit] 7 Enter a number string
To enter a pause (p): Press and hold G
To delete: In Pause Dial window, S[Menu] 7 Delete 7 YES
Send Pause Dial
Menu 4 Settings 4 Phone Settings 4 Pause Dial
4 * z [Send] 4 Enter a phone number 4 J 4 Once line is
z [Send]
connected, press *
Number string is sent each time * z [Send] is pressed.
To send all number strings at one time: Once line is connected, press and
z 7 Send at one time
hold N
2
2-3