Outgoing Call Functions
Showing/Hiding Caller ID
>Enter number 7 S[Menu] 7 Notify caller ID 7 OFF or ON
To cancel setting: S[Menu] 7 Notify caller ID 7 Cancel prefix
Setting Caller ID on/off (Caller ID: ZP.2-21)
Adding Prefix to Phone Number
■
Save Prefix
>Main
Menu Settings Call Settings
Highlight <Not Recorded> A[Edit] Enter a name
Enter a prefix number
Up to seven entries can be saved.
To check entries: Select a saved prefix.
To delete entries: Highlight a prefix 7 S[Menu] 7 Delete this or
Delete all (7 For Delete all , enter Phone Password) 7 YES
■
Make Calls Using Prefix
>
Enter a number 7 S[Menu] 7 Prefix numbers 7 Select an entry
7 Voice Calls: J / Video Calls: A[V. Call]
Alternatively, in detail window of Phone Book, Redial, Outgoing Call Logs
or Incoming Call Logs, S[Menu] 7 Prefix numbers 7 Select an
entry 7 Voice Calls: J / Video Calls: A[V. Call]
Example: Save "186" and "184" as prefixes, and add them to phone
numbers to show/hide your caller ID when making calls.
Sending Touch-tone Signals
Send touch-tone signals for services such as reserving
tickets, checking bank balance, etc. Save number strings to
be sent as a touch-tone signal. Use P (pause) to separate
numbers when saving.
■
Save Pause Dial
>Main
A[Edit] 7 Enter a number string
To enter a pause (p): Press and hold G
To delete: In Pause Dial window, S[Menu] 7 Delete 7 YES
Prefix
■
Send Pause Dial
>Main
connected, press
Number string is sent each time
To send all number strings at one time: Once line is connected, press and
hold
Menu Settings Phone Settings Pause Dial
Menu Settings Phone Settings Pause Dial
[Send] Enter a phone number J Once line is
[Send]
[Send] is pressed.
7 Send at one time
2
2-3