Engaged Call Functions; Operations Available During A Voice Call - SoftBank 924P User Manual

■
Operator Priority for Automatic Search
＞
PLMN Setting 7 S[Menu] 7 Select an item (See below)
Item
Add your
Save currently connected operator
＞A[Finish] 7 YES
network
＞Select an operator 7 *
Add from list
type 7 A[Finish] 7 YES
⿟
To search operators by country/region: A[Search]
7 Select a country/region (To search again in country/
region list: A[Search] 7 Enter a country/region
name)
Direct input Save unlisted operators by entering country/region code
and operator code
＞Enter country/region code (3 digits) and operator code
(2 to 3 digits) 7 Select a network type 7 A[Finish]
7 YES
＞Select a priority 7 A[Finish] 7 YES
Change
priority
＞
Delete this/
YES 7 A[Finish] 7 YES
Delete all
■
View Operator Name in Standby
＞
Operator Name 7 ON or OFF
⿟
When ON is set, Clock Position is set to Pattern 1 (ZP.18-5).
Operation/Description
z [Set] 7 Select a network
<Default> OFF

Engaged Call Functions

Operations Available during a Voice Call

＞?
z
Adjust Volume
⿟
Adjust volume within two seconds.
⿟
Adjusted volume is retained even after calls end or
handset is turned off.
＞*
Place Call on
z [Hold]
⿟
Hold
To resume call: J
Speaker Toggle Speaker or Earpiece
⿟
J
ON/OFF
Record
Record for about three minutes per call
＞A[Rec]
Conversation
⿟
To end recording: *
⿟
To play back recorded data: ZP.2-16
＞Press and hold H
Toggle Manner
Mode
Toggle
Toggle handset or Bluetooth
＞Press and hold J
Handset/
Bluetooth
®
z [Stop]/K
device
®
2
2-11