Auto Shutter (Digicam Mode Only) - SoftBank 924P User Manual

In Photo Mode
Capture a succession of up to 20 still images automatically
with a single press.
1
In Viewfinder, S [Menu] 7 CHG camera-mode 7
Action mode
2
Frame subject 7 z [Record], P or q *
Images are automatically saved.
■
Change Continuous Shooting Settings
＞After Step 1 above, S[Menu] 7 Cont. shooting set. 7 Select an
item (See below)
Item
＞Select an item
Action mode
・
Auto : Capture multiple still images automatically
・
Manual : Capture one by one manually
・
Auto bracket : Auto-capture nine images of varying
brightness or color
Shot interval Select an interval when Action mode is set to Auto
＞Select an interval
Shot number* Set number of images when Action mode is set to Auto
or Manual
＞Enter number
* Savable number of images is as follows:
・
VGA (480x640): 4 (Unchangeable)
・
QVGA (240x320): 5 to 10
・
QCIF (144x176): 5 to 20
・
Sub-QCIF (96x128): 5 to 20
Operation/Description

Auto Shutter (Digicam Mode Only)

Shutter automatically releases when camera detects certain
conditions. Select an Auto Shutter type to specify condition
(When Photo mode is set to Intelligent Auto or Focus is set
to FaceDetect ).
1 In Viewfinder, S [Menu] 7 AutoShutter 7 Select
an item (See below)
Item
OFF Cancel Auto shutter setting
Love shutter Shutter releases when two faces move close together
＞
Friends , Lovers or Lovers+Smile
⿟
When Lovers is set, distance between two faces is
closer than Friends .
Group shutter Camera detects up to five faces. When more people are in
frame, Auto timer activates and shutter releases in three
seconds
＞Select number of people
Smile shutter Shutter releases when Camera detects a smiling face. If
multiple faces are detected, shutter releases when camera
detects a smile in yellow focus guide
Note
⿟
Alternatively, capture still images by pressing *
q
even when Auto shutter is set.
⿟
Auto Timer is set to OFF after capturing.
Operation/Description
z [Record], P or
6
6-13