Armrest Width Adjustment; Armrest Angle Adjustment - Pride Mobility Jazzy 600 Owner's Manual

Hide thumbs Also See for Jazzy 600:
Table of Contents

Advertisement

V .
C O M F O R T

Armrest Width Adjustment

You can change each armrest’s width independently of the other.
NOTE: Changing the armrest width may increase the
overall width of your power chair.
To change the armrest width:
1. Locate the two armrest knobs on each side of the arm-
rest receiver bracket. See figure 15.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.

Armrest Angle Adjustment

To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 15.
2. Loosen the locking nuts.
3. Turn the adjusting screw clockwise to lower the front
of the armrest, or turn the adjusting screw anticlockwise
to raise the front of the armrest.
4. Tighten the locking nuts to lock the adjusting screw into
place.
Foot Platform Height
The foot platform height is easily adjusted to different heights
in 1.27 cm increments.
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot plat-
form bracket. See figure 16.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the quick release fasteners into the foot plat-
form bracket and tighten.
Foot Platform Depth
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot platform bracket. See figure 16.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the quick release fasteners into the foot
platform bracket and tighten.
Quick Release Fasteners: The foot platform is attached to the power base with two quick release fasteners. See figure
16. Each quick release fastener consists of a bolt, a lever, and a nut. See figure 17. The lever has a cam on the end that
allows it to clamp into place. The quick release fastener has two states: clamped and unclamped. When the lever is open,
the quick release fastener is unclamped. When the lever is closed, the quick release fastener is clamped.
Jazzy 600
A D J U S T M E N T S
FOOT
PLATFORM
BRACKET
Figure 16. Foot Platform Adjustment
LEVER (OPEN)
Figure 17. Quick Release Fastener Operation
www.pridemobility.com
FOOT PLATFORM
RETAINING PIN
CAM
NUT
BOLT
UNCLAMPED
QUICK RELEASE
FASTENERS
LEVER (FULLY CLOSED)
CLAMPED
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents