Lexmark OptraImage 232 Setup Manual page 28

document glass
Glass
Moving the scan unit
28
Cleaning the
1
2
3
If you need to transport the scanner, follow these instructions
to lock the scanner:
1
2
Wet a clean, lint-free cotton cloth or swab with some
isopropyl alcohol (95%).
Open the ADF unit and document cover as shown. Wipe
the glass of flatbed and ADF area by moving the cloth or
swab from side to side.
Close the ADF unit and document cover. Your scan unit is
now ready for use.
Disconnect the power to the scan unit.
Raise the scanner high enough to push the switch down
to the locked position.
OptraImage Setup Guide