Table of Contents
Advertisement
E L A N
Figure A-1: USB Port
© ELAN 2010 | All rights reserved.
Appendix A: Programming
While the M86A Multi-Room Controller is designed to work right out of the box with the
HC6 or HC12 System Controller, ELAN configuration software provides customized
functionality for the specific environment for which it is being configured. Variables can be
set for:
• IR Routing
• Page Enable / Disable
• Page Volume
• DB Enable / Disable
• DB Volume
When the M86A is initially added to the system in the ELAN configuration software, the
software will query the M86A for its firmware version. If a newer version of firmware is
available, you will be prompted to update the M86A.
In order to update the M86A's firmware, pull out on the Access Door from the right side of
the M86A front panel and connect a standard USB A to USB Mini B cable from a computer
running Windows XP, Vista or Windows 7 to the USB Download port. Each M86A chassis
is updated individually.
Once firmware has been updated, remove and reapply power to reboot the M86A.
Note: See the ELAN configuration software Reference Guide for specific programming
steps.
M86A
• WHM Enable / Disable
• DND Enable / Disable
•Zone Turn-On Volume
• Zone Bass / Treble / Loudness
• Source Input Levels
INSTALLATION MANUAL
Page 38
Hide quick links:
Advertisement
Table of Contents
