E L A N
© ELAN 2010 | All rights reserved.
Applications
This section describes typical applications using the M86A for audio distribution. These
are all basic in nature and should be used for guideline purposes only. Each application
can be augmented as needed for individual circumstances. This section is for overall
design purposes.
Please see Chapter 3: M86A Connections for specific wiring configurations.
Zone/Sub-Zone Definitions
A zone is defined as an area within a system that has independent source selection ability.
A zone may be one room, or several combined areas. A sub-zone is a part of a zone - it
shares source selection - but has independent control of volume. Typically, sub-zones use
volume controls for volume up/down.
M86A
INSTALLATION MANUAL
Page 13