Troubleshooting; Setup Troubleshooting; Incorrect Language Appears On The Display; Power Button Is Not Lit - Lexmark 3400 Series User Manual

Troubleshooting

•
"Setup troubleshooting" on page 58
•
"Print troubleshooting" on page 61
•
"Copy troubleshooting" on page 64
•
"Scan troubleshooting" on page 65
•
"Fax troubleshooting" on page 67
•
"Jams and misfeeds troubleshooting" on page 68
•
"Memory card troubleshooting" on page 70
•
"Error messages" on page 71
•
"Removing and reinstalling the software" on page 74

Setup troubleshooting

Incorrect language appears on the display

1
Press to turn off the printer.
2
Press and hold
3
Release the buttons.
4
Press or
5
Press to save.

Power button is not lit

1
Disconnect the power cord from the wall outlet, and then from the printer.
2
Plug the cord all the way into the power supply on the printer.
3
Plug the cord into an electrical outlet that other electrical devices have been using.
4
If the light is not on, press

Software does not install

The following operating systems are supported:
•
Windows 98/Me
•
Windows 2000
•
Windows XP
followed by until the display reads Language Reset.
repeatedly until the language you want appears on the display.
.
2
1
58