Scan Was Not Successful; Scanning Takes Too Long Or Freezes The Computer; Poor Scanned Image Quality - Lexmark 3400 Series User Manual

d
Select your printer model.
e
Select your operating system.
f
Select the file you want to download, and then follow the directions on the computer screen.

Scan was not successful

1
Check the USB cable for any obvious damage.
2
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
3
Firmly plug the square end of the USB cable into the back of the printer.
Turn off and then restart your computer.
1
Uninstall the printer software, and then reinstall it. For more information, see "Removing and reinstalling the
software" on page 74.
2
If the software still does not install correctly, visit our Web site at
software.
a
In all countries or regions except the United States, select your country or region.
b
Click the links for drivers or downloads.
c
Select your printer family.
d
Select your printer model.
e
Select your operating system.
f
Select the file you want to download, and follow the directions on the computer screen.

Scanning takes too long or freezes the computer

Close all programs not being used.
To change the scanning resolution to a lower value:
1
Click Start Programs or All Programs
2
Select All-In-One Center.
3
From the Scan area, click See More Scan Settings.
4
Click Display Advanced Scan Settings.
5
From the Select Scan Resolution menu, select a lower number.

Poor scanned image quality

If an error message is displayed, see "Error messages" on page 71.
If the scanner glass is dirty, gently wipe it with a clean, lint-free cloth dampened with water.
To adjust the quality of a scan:
1
Make sure the printer is connected to a computer, and both the printer and the computer are on.
2
Load an original document facedown on the scanner glass.
3
From the desktop, double-click the Imaging Studio icon.
USB symbol.
Lexmark 3400 Series.
66
www.lexmark.com to check for the latest