Nvr70/70-R Series - Dahua NVR4108-P User Manual

Reverse/Pause
Play Next
Play/Pause
Window switch
Shuttle(outer
ring)
Jog(inner dial)
USB port
Remote control
receiver
Remote control
indicator light
Status indicator
light
Power indicator
light
Record light
HDD abnormal
status indictor
light

2.1.8 NVR70/70-R Series

The front panel is shown as in Figure 2-8.
In normal playback or pause mode, click this button to reverse
|| playback
In reverse playback, click this button to pause playback.
|
In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
In normal playback click this button to pause playback
||
In pause mode, click this button to resume playback.
Mult Click it to switch one-window/multiple-window.
In real-time monitor mode it works as left/right direction key.
Playback mode, counter clockwise to forward and clock wise to
backward.
Up/down direction key.
Playback mode, turn the inner dial to realized frame by frame
playback. (Only applies to some special versions.)
To connect USB storage device, USB mouse.
IR It is to receive signal from the remote control.
ACT Remote control indicator light
Status The light is on if device operates properly.
POWER Power indicator light
1-16 It becomes on when system is recording.
It becomes on when there is no HDD, HDD error occurs, or
HDD
HDD is full.
37