Nvr72 Series - Dahua NVR4108-P User Manual

Name
+12V
eSATA
RS-232
HDMI
VGA
PoE
PORTS

2.2.8 NVR72 Series

The NVR72 series rear panel is shown as below. See Figure 2-29.
Please refer to the following sheet for detailed information.
Name
RS-232
/
Network port
eSATA port
USB2.0 port
RS-232 debug
COM.
High Definition
Media Interface
VGA video output
port
16 PoE ports
Figure 2-29
Function
USB2.0 port. Connect to mouse, USB storage device,
USB2.0 port
USB burner and etc.
10M/100M/1000Mbps
Network port
Connect to the network cable.
RS-232 debug It is for general COM debug to configure IP address or
COM. transfer transparent COM data.
Function
+12V power output port. It can provide the power to
some peripheral devices such as the camera or the
alarm device. Please note the supplying power
shall be below 1A.
One 10M/100M/1000Mbps self-adaptive Ethernet
port. Connect to the network cable.
External SATA port. It can connect to the device of
the SATA port. Please jump the HDD when there is
peripheral connected HDD.
USB2.0 port. Connect to mouse, USB storage
device, USB burner and etc.
It is for general COM debug to configure IP address
or transfer transparent COM data.
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the
display device. HDMI version is 1.3
VGA video output port. Output analog video signal.
It can connect to the monitor to view analog video.
Built-in Switch. Support PoE. The 16 PoE ports
series products supports total 150W power. One
PoE port max supports 15W.
self-adaptive Ethernet port.
51