Nvr41-8P Series; Nvr42/42-P/42-8P/72/72-8P Series - Dahua NVR4108-P User Manual

Icon
NET
PWR
HDD
IR

2.1.3 NVR41-8P Series

The front panel is shown as below. See Figure 2-3.
Please refer to the following sheet for detailed information.
SN
1
2
3
4

2.1.4 NVR42/42-P/42-8P/72/72-8P Series

The front panel is shown as below. See Figure 2-4.
Please refer to the following sheet for front panel button information.
Name
Power button
Name
Network status
indicator light
Power indicator
light
HDD status
indictor light
Remote control
receiver
Name
Network status indicator
light
Power indicator light
HDD status indictor light
USB
Icon Function
Power button, press this button for three seconds to boot up
or shut down NVR.
Function
The red light becomes on when the network
connection is abnormal.
The red light becomes on when the power
connection is OK.
The red light becomes on when HDD is abnormal.
It is to receive signal from the remote control.
Figure 2-3
Function
The red light becomes on when the network
connection is abnormal.
The red light becomes on when the power
connection is OK.
The red light becomes on when HDD is abnormal.
USB port
Figure 2-4
29