Alarm Out - Dahua NVR4108-P User Manual

Please refer to the following sheet for detailed information.
Parameter
Enable tour
Interval
Split
Motion
tour/Alarm
tour

5.8.5.4 Alarm Out

The alarm output interface is shown as below. See Figure 5-96
Here you can set alarm output mode: auto/manual/stop.
Figure 5-95
Function
Check the box here to enable tour function.
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-window according to device channel
amount.
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
273