Maintenance
Replacing print cartridges
The Lexmark 3100 Series uses the following cartridges:
Left cartridge carrier
19 (Color)
20 (Color)
25 (Color)
Note: In order to print, two cartridges must be installed. Either
For information about ordering supplies, see Maintenance on page 20.
Removing the used cartridges
1
Make sure the AIO is on.
2
Lift the scanner unit until the scanner support keeps it open.
The print cartridge carrier moves and stops at the loading position
unless the AIO is busy.
3
Pull the top of the cartridge toward you until you hear a snap.
4
Remove the old cartridges. Store them in an air-tight container or
dispose of them (see page 43).
Note: Use the cartridge storage unit that was packaged with
Right cartridge carrier
48 (Black)
50 (Black)
55 (Black)
90 (Photo)
a black or photo cartridge may be used with the color
cartridge.
your photo cartridge to store cartridges for future use.
38