Setup troubleshooting
Use this section to solve problems you may have during setup.
Power light does not come on
1
Make sure the power supply is correctly inserted into the AIO (see
page 6).
2
Check the power supply connections.
3
Press Power on the control panel.
Alignment page or test page does not print
1
Make sure you remove the sticker and transparent tape from both
print cartridges. For help installing print cartridges, see page 39.
2
Make sure the print cartridges are properly installed (see page 39).
3
Make sure you loaded the paper correctly and did not force the
paper into the AIO (see page 8).
4
Make sure the Lexmark 3100 Series is set as the default printer
(see page 54).
When I insert the AIO software CD, nothing happens
From the desktop, double-click the My Computer icon, and then
double-click the CD-ROM drive icon.
Windows XP users, click Start
CD-ROM drive icon.
Note: If auto launch is turned off, double-click setup.exe.
My Computer, and then double-click the
46