Lexmark 3100 Series All-In-One User Manual page 16

The card reader (if available on your AIO) has four slots to accommodate
these media and a small light that blinks indicating the card is being read or
is transmitting data.
Note: Do not remove the digital camera memory card while
This illustration shows you where to insert each of the supported digital
camera memory cards.
Before you insert your memory card, consider the following information:
•
If you are inserting a Memory Stick or SmartMedia card, make sure
the gold contact area faces up.
•
If you are inserting a CompactFlash Type I or Type II, MultiMedia, or
Secure Digital card, make sure the name label faces up.
•
If you are inserting a Secure Digital card, make sure the gold
contact area faces down.
Note: Your AIO recognizes one source for photos at a time.
Note: The manufacturer name may differ from the digital
A small light on the memory card reader flashes and turns itself off
when the digital camera memory card is properly inserted.
The light blinks when the card is transferring data to or from the
computer.
the light is on or blinking.
Memory Stick
Insert only one digital camera memory card at a time.
camera memory card types listed on page 11.
Secure Digital,
MultiMedia Card
CompactFlash Type I and Type II,
IBM Microdrive
12
SmartMedia