Switch Between Main Band And Sub Band; Switch Between Channel Mode And Vfo Mode; Channel Adjusting; Frequency Adjusting - AnyTone AT-3318UV Instruction Manual

Dual band handheld radio

Hide thumbs Also See for AT-3318UV:

Table of Contents

BASIC OPERATIONS

Switch between Main band and Sub band

Under standby state, press

band. Arrow directs the current operational channel.

Under standby state, press

mode(VFO).

When transceiver in Channel mode or FM radio channel mode, rotate channel switch to adjust channel.

Rotate channel switch clockwise to enter the downward channel, anticlockwise to enter the upward

channel.

NOTE: In transceiver mode, arrow directs the main band channel.

If there is a null channel between two channels, transceiver will skip null channel, enter into next channel

directly.

When transceiver in VFO mode or FM radio frequency mode, rotate channel switch to adjust frequency.

Rotate channel switch clockwise to increase frequency, anticlockwise to decrease frequency. Every rotate

can add or reduce one stepping value.

key to switch channel between Main band and Sub

key to set main band as Channel mode or frequency

Table of Contents