PREPARATION
Installing / Removing the Battery
1.
Match the three grooves of the battery pack with
the corresponding guides on the back of the
transceiver, and then push it.
2.
Press the battery pack until the release latch on the
top of the transceiver locks. After hearing a "click"
sounds, the battery has been locked.
3.
To remove the battery pack, slide up the release
latch and remove the pack away from the
transceiver.
Installing / Removing the Antenna
Installing the Antenna:
■
Screw the antenna into the connector on the top
of the transceiver by holding the antenna at its base
and turning it clockwise until secure.
■ Removing the Antenna:
Turn the antenna anticlockwise to remove it.
8
Professional
FM Transceiver