Bellfires DERBY LARGE 3 CF Installation Instructions Manual page 30

Bellfi res
English
Position the gas supply pipe such that it can be easily mounted after installation.
Because the control system is outside the appliance, the gas pipe must lead to where
the operating unit (built in), the gas regulating block (and the receiver) assembly are
fi tted.
Move the appliance until it is ± 5 cm from the rear wall and ensure it is level. Place the
nonfl ammable insulation plate (min. 12 mm) between the appliance and rear wall. The
appliance may not be installed against a fl ammable rear wall.
Attach the appliance to the rear wall with 2 wedge bolts. Use the adjustable mounting
brackets at the side of the appliance for this.
- 2x Mounting bracket.
52 Installation instructions