Choosing A Display Mode; Changing Display Settings; Using Audio Features - ThinkPad Yoga14 User Manual

Table of Contents

Advertisement

Choosing a display mode

You can display your desktop and apps on the computer display, the external display, or both. To choose
how to display the video output, press the display-mode switching key
mode you prefer.
There are four display modes:
• Disconnect: Displays the video output only on your computer screen.
Note: Depending on the situation, you might see Disconnect, PC screen only, Computer only, or
Disconnect projector.
• Duplicate: Displays the same video output on both your computer screen and an external display.
• Extend: Extends the video output from your computer display to an external display. You can drag and
move items between the two displays.
• Projector only: Shows the video output only on an external display.
Note: Depending on the situation, you might see Projector only or Second screen only.
Note: If you show DOS or programs using DirectDraw or Direct3D
display shows the video output.

Changing display settings

You can change the display settings, such as the display resolution, font size, and so on.
To change the display settings, do the following:
1. Open Control Panel and click Appearance and Personalization.
2. Click Display for further configuration.
3. Click Apply. The change will take effect after you log off.

Using audio features

Your computer is equipped with the following:
• Microphones
Note: The left microphone and right microphone automatically switch between each other when the
computer screen rotates.
• Speakers
Note: The left speaker and right speaker automatically switch between each other when the computer
screen rotates.
• Combo audio connector, 3.5 mm (0.14 inch) in diameter
Your computer also has an audio chip that enables you to enjoy various multimedia audio features, such
as the following:
• Compliant with Intel High Definition Audio
• Playback of Musical Instrument Digital Interface (MIDI) and Moving Picture Experts Group Audio Layer-3
(MP3) files
• Recording and playback of pulse-code modulation (PCM) and Waveform Audio File Format (WAV) files
• Recording from various sound sources, such as a headset attached
and then select a display
®
in full-screen mode, only the main
.
Chapter 2
Using your computer
45

Advertisement

Table of Contents
loading

Table of Contents