Replacing The Storage Drive - ThinkPad Yoga14 User Manual

Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. Static electricity could damage the memory module.
Replacing the memory module
To replace the memory module, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 107.
2. Close the computer display, and turn the computer over.
3. Remove the base cover assembly. See "Replacing the base cover assembly" on page 112.
4. Open the latches on both sides of the memory slot at the same time
module 2 .
5. Place the notched end of the new memory module toward the contact edge side of the memory slot,
and insert the memory module into the memory slot at an angle of about 20 degrees
memory module downward until it snaps into place
in the memory slot and cannot be moved easily.
Attention: Do not touch the contact edge of the memory module. Otherwise the memory module
might be damaged.
6. Reinstall the base cover assembly.
7. Turn the computer over again. Connect the ac power adapter and all cables to the computer.

Replacing the storage drive

Before you start, print these instructions. Read the important safety information first. See "Important
safety information" on page vi.
1
, and then remove the memory
2 . Ensure that the memory module is firmly installed
Chapter 9
1 . Pivot the
115
.
Replacing devices